With the popularity of organic fertilizers, the use of organic fertilizer production lines is also significantly increasing. When changing the oil in organic fertilizer production lines, various issues often arise. Today, we will analyze some precautions for changing the oil in organic fertilizer production lines. Some users, in order to reduce operating costs when using organic fertilizer production lines, use a mixture of waste engine oil and half or 80% new engine oil when exchanging engine oil. This approach often results in small losses.

Because the waste engine oil in the organic fertilizer production line is rich in oxidation substances, rubber particles, and many iron filings, it will greatly shorten the service life of fresh engine oil, accelerate the speed of wear and tear, not only fail to change the oil, but also cause mechanical accidents such as burning tiles and holding shafts. If the oil level exceeds the upper marking line, it not only increases the consumption of oil, but also causes the organic fertilizer granulator and organic fertilizer crusher to burn oil, carbon deposits in the cylinder, and an increase in carbon particles in the oil, which will accelerate the wear of components such as the cylinder and shorten its service life.

In addition to the organic fertilizer crusher, organic fertilizer granulator, organic fertilizer equipment, and organic fertilizer production line, the remaining oil is sucked into the cylinder to create a flying appearance. There is another situation where, in order to save maintenance costs, waste engine oil from the oil pan of an organic fertilizer production line is mixed into the gearbox, which can also result in small losses. Because the transformed engine oil is rich in mechanical impurities, it can accelerate the wear rate of moving parts when used in the gearbox.

In addition, the involvement of waste engine oil will cause the gear oil to become thinner, leading to increased gear wear. However, the replaced waste engine oil can be used in the air filter oil pan to save fresh engine oil. Organic fertilizer granulator, organic fertilizer production line, and organic fertilizer crusher have low gasoline and oil viscosity, making them suitable for use under light loads. Diesel engine oil has a high viscosity and is suitable for use under heavy loads.